- ONE TIME TEACHING STROKE
Using flush memory, all data is kept within the computer without a power supply.
- HALF OPEN FUNCTION
Door open for (7) seconds or more when 50% half open function is employed, will automatically fully open.
- TROUBLE DETECTION
When trouble occurs, power is shut off to the motor and the power indicator flashes
- DOOR PRESSING FUNCTION
When closing, the door is pressed further to eliminate any gap betwen the door and the frame.
- AUTOMATIC BREAKING POSITION ADJUSTMENT
Computer adjusts braking position automatically.
- Universal Voltage acceptance AC85V to 265V Range.
- 24V DC built-in supply for Sensor Switch Power.
- Auto-Flush long term memory retention system.
- DC Motor & Microprocessor Control System
- Simple Connections for Sensor Switch, Photo Electric Cell, Half Open Features and 24VDC Output
- One shot lock system (Option)
- Half Open System
- Auto Reverse on door blockage
- Uses Original EDM 18-A Rail & Hanger Bracket
- Sensor Switch Activation Indicator.
- Adjustable Open & Closing Speeds 250 to 500mm/PS
- Adjustable Open and close braking Power
- Automatic Open and Close Braking Position
- Auto reset & re-start on Overload
- Activation test switch (on Control Box)
- Open Timer (0 to 30 Seconds)
- Press Closing feature.
- 24 month (from shipment) warranty to Control Box & Motor Gear Box.
EDM G Type is an ideal operator for low end specification requirements.
- Accepts 100V - 240V
- No Transformer Required
- DC 24V Power Supply for Sensor
- DC Motor & Microprocessor Control
- Optional One Shot Lock Function
Note: EDM G Type is not certified to CE or CUL Standards.
Our EDM G Type Series can also be purchased in KIT form, allowing you the flexibility to create a kit to your requirements.
We can therefore offer you more flexibility and capability at economical prices.
